Downloading and processing files and images

Scrapy provides reusable item pipelines for downloading files attached to a particular item (for example, when you scrape products and also want to download their images locally). These pipelines share a bit of functionality and structure (we refer to them as media pipelines), but typically you’ll either use the Files Pipeline or the Images Pipeline.

Both pipelines implement these features:

  • Avoid re-downloading media that was downloaded recently
  • Specifying where to store the media (filesystem directory, Amazon S3 bucket)

The Images Pipeline has a few extra functions for processing images:

  • Convert all downloaded images to a common format (JPG) and mode (RGB)
  • Thumbnail generation
  • Check images width/height to make sure they meet a minimum constraint

The pipelines also keep an internal queue of those media URLs which are currently being scheduled for download, and connect those responses that arrive containing the same media to that queue. This avoids downloading the same media more than once when it’s shared by several items.

Using the Files Pipeline

The typical workflow, when using the FilesPipeline goes like this:

  1. In a Spider, you scrape an item and put the URLs of the desired into a file_urls field.
  2. The item is returned from the spider and goes to the item pipeline.
  3. When the item reaches the FilesPipeline, the URLs in the file_urls field are scheduled for download using the standard Scrapy scheduler and downloader (which means the scheduler and downloader middlewares are reused), but with a higher priority, processing them before other pages are scraped. The item remains “locked” at that particular pipeline stage until the files have finish downloading (or fail for some reason).
  4. When the files are downloaded, another field (files) will be populated with the results. This field will contain a list of dicts with information about the downloaded files, such as the downloaded path, the original scraped url (taken from the file_urls field) , and the file checksum. The files in the list of the files field will retain the same order of the original file_urls field. If some file failed downloading, an error will be logged and the file won’t be present in the files field.

Using the Images Pipeline

Using the ImagesPipeline is a lot like using the FilesPipeline, except the default field names used are different: you use image_urls for the image URLs of an item and it will populate an images field for the information about the downloaded images.

The advantage of using the ImagesPipeline for image files is that you can configure some extra functions like generating thumbnails and filtering the images based on their size.

The Images Pipeline uses Pillow for thumbnailing and normalizing images to JPEG/RGB format, so you need to install this library in order to use it. Python Imaging Library (PIL) should also work in most cases, but it is known to cause troubles in some setups, so we recommend to use Pillow instead of PIL.

Enabling your Media Pipeline

To enable your media pipeline you must first add it to your project ITEM_PIPELINES setting.

For Images Pipeline, use:

ITEM_PIPELINES = {'scrapy.pipelines.images.ImagesPipeline': 1}

For Files Pipeline, use:

ITEM_PIPELINES = {'scrapy.pipelines.files.FilesPipeline': 1}

Note

You can also use both the Files and Images Pipeline at the same time.

Then, configure the target storage setting to a valid value that will be used for storing the downloaded images. Otherwise the pipeline will remain disabled, even if you include it in the ITEM_PIPELINES setting.

For the Files Pipeline, set the FILES_STORE setting:

FILES_STORE = '/path/to/valid/dir'

For the Images Pipeline, set the IMAGES_STORE setting:

IMAGES_STORE = '/path/to/valid/dir'

Supported Storage

File system is currently the only officially supported storage, but there is also support for storing files in Amazon S3.

File system storage

The files are stored using a SHA1 hash of their URLs for the file names.

For example, the following image URL:

http://www.example.com/image.jpg

Whose SHA1 hash is:

3afec3b4765f8f0a07b78f98c07b83f013567a0a

Will be downloaded and stored in the following file:

<IMAGES_STORE>/full/3afec3b4765f8f0a07b78f98c07b83f013567a0a.jpg

Where:

  • <IMAGES_STORE> is the directory defined in IMAGES_STORE setting for the Images Pipeline.
  • full is a sub-directory to separate full images from thumbnails (if used). For more info see Thumbnail generation for images.

Amazon S3 storage

FILES_STORE and IMAGES_STORE can represent an Amazon S3 bucket. Scrapy will automatically upload the files to the bucket.

For example, this is a valid IMAGES_STORE value:

IMAGES_STORE = 's3://bucket/images'

You can modify the Access Control List (ACL) policy used for the stored files, which is defined by the FILES_STORE_S3_ACL and IMAGES_STORE_S3_ACL settings. By default, the ACL is set to private. To make the files publicly available use the public-read policy:

IMAGES_STORE_S3_ACL = 'public-read'

For more information, see canned ACLs in the Amazon S3 Developer Guide.

Usage example

In order to use a media pipeline first, enable it.

Then, if a spider returns a dict with the URLs key (file_urls or image_urls, for the Files or Images Pipeline respectively), the pipeline will put the results under respective key (files or images).

If you prefer to use Item, then define a custom item with the necessary fields, like in this example for Images Pipeline:

import scrapy

class MyItem(scrapy.Item):

    # ... other item fields ...
    image_urls = scrapy.Field()
    images = scrapy.Field()

If you want to use another field name for the URLs key or for the results key, it is also possible to override it.

For the Files Pipeline, set FILES_URLS_FIELD and/or FILES_RESULT_FIELD settings:

FILES_URLS_FIELD = 'field_name_for_your_files_urls'
FILES_RESULT_FIELD = 'field_name_for_your_processed_files'

For the Images Pipeline, set IMAGES_URLS_FIELD and/or IMAGES_RESULT_FIELD settings:

IMAGES_URLS_FIELD = 'field_name_for_your_images_urls'
IMAGES_RESULT_FIELD = 'field_name_for_your_processed_images'

If you need something more complex and want to override the custom pipeline behaviour, see Extending the Media Pipelines.

If you have multiple image pipelines inheriting from ImagePipeline and you want to have different settings in different pipelines you can set setting keys preceded with uppercase name of your pipeline class. E.g. if your pipeline is called MyPipeline and you want to have custom IMAGES_URLS_FIELD you define setting MYPIPELINE_IMAGES_URLS_FIELD and your custom settings will be used.

Additional features

File expiration

The Image Pipeline avoids downloading files that were downloaded recently. To adjust this retention delay use the FILES_EXPIRES setting (or IMAGES_EXPIRES, in case of Images Pipeline), which specifies the delay in number of days:

# 120 days of delay for files expiration
FILES_EXPIRES = 120

# 30 days of delay for images expiration
IMAGES_EXPIRES = 30

The default value for both settings is 90 days.

If you have pipeline that subclasses FilesPipeline and you’d like to have different setting for it you can set setting keys preceded by uppercase class name. E.g. given pipeline class called MyPipeline you can set setting key:

MYPIPELINE_FILES_EXPIRES = 180

and pipeline class MyPipeline will have expiration time set to 180.

Thumbnail generation for images

The Images Pipeline can automatically create thumbnails of the downloaded images.

In order use this feature, you must set IMAGES_THUMBS to a dictionary where the keys are the thumbnail names and the values are their dimensions.

For example:

IMAGES_THUMBS = {
    'small': (50, 50),
    'big': (270, 270),
}

When you use this feature, the Images Pipeline will create thumbnails of the each specified size with this format:

<IMAGES_STORE>/thumbs/<size_name>/<image_id>.jpg

Where:

  • <size_name> is the one specified in the IMAGES_THUMBS dictionary keys (small, big, etc)
  • <image_id> is the SHA1 hash of the image url

Example of image files stored using small and big thumbnail names:

<IMAGES_STORE>/full/63bbfea82b8880ed33cdb762aa11fab722a90a24.jpg
<IMAGES_STORE>/thumbs/small/63bbfea82b8880ed33cdb762aa11fab722a90a24.jpg
<IMAGES_STORE>/thumbs/big/63bbfea82b8880ed33cdb762aa11fab722a90a24.jpg

The first one is the full image, as downloaded from the site.

Filtering out small images

When using the Images Pipeline, you can drop images which are too small, by specifying the minimum allowed size in the IMAGES_MIN_HEIGHT and IMAGES_MIN_WIDTH settings.

For example:

IMAGES_MIN_HEIGHT = 110
IMAGES_MIN_WIDTH = 110

Note

The size constraints don’t affect thumbnail generation at all.

It is possible to set just one size constraint or both. When setting both of them, only images that satisfy both minimum sizes will be saved. For the above example, images of sizes (105 x 105) or (105 x 200) or (200 x 105) will all be dropped because at least one dimension is shorter than the constraint.

By default, there are no size constraints, so all images are processed.

Extending the Media Pipelines

See here the methods that you can override in your custom Files Pipeline:

class scrapy.pipelines.files.FilesPipeline
get_media_requests(item, info)

As seen on the workflow, the pipeline will get the URLs of the images to download from the item. In order to do this, you can override the get_media_requests() method and return a Request for each file URL:

def get_media_requests(self, item, info):
    for file_url in item['file_urls']:
        yield scrapy.Request(file_url)

Those requests will be processed by the pipeline and, when they have finished downloading, the results will be sent to the item_completed() method, as a list of 2-element tuples. Each tuple will contain (success, file_info_or_error) where:

  • success is a boolean which is True if the image was downloaded successfully or False if it failed for some reason
  • file_info_or_error is a dict containing the following keys (if success is True) or a Twisted Failure if there was a problem.
    • url - the url where the file was downloaded from. This is the url of the request returned from the get_media_requests() method.
    • path - the path (relative to FILES_STORE) where the file was stored
    • checksum - a MD5 hash of the image contents

The list of tuples received by item_completed() is guaranteed to retain the same order of the requests returned from the get_media_requests() method.

Here’s a typical value of the results argument:

[(True,
  {'checksum': '2b00042f7481c7b056c4b410d28f33cf',
   'path': 'full/0a79c461a4062ac383dc4fade7bc09f1384a3910.jpg',
   'url': 'http://www.example.com/files/product1.pdf'}),
 (False,
  Failure(...))]

By default the get_media_requests() method returns None which means there are no files to download for the item.

item_completed(results, items, info)

The FilesPipeline.item_completed() method called when all file requests for a single item have completed (either finished downloading, or failed for some reason).

The item_completed() method must return the output that will be sent to subsequent item pipeline stages, so you must return (or drop) the item, as you would in any pipeline.

Here is an example of the item_completed() method where we store the downloaded file paths (passed in results) in the file_paths item field, and we drop the item if it doesn’t contain any files:

from scrapy.exceptions import DropItem

def item_completed(self, results, item, info):
    file_paths = [x['path'] for ok, x in results if ok]
    if not file_paths:
        raise DropItem("Item contains no files")
    item['file_paths'] = file_paths
    return item

By default, the item_completed() method returns the item.

See here the methods that you can override in your custom Images Pipeline:

class scrapy.pipelines.images.ImagesPipeline
The ImagesPipeline is an extension of the FilesPipeline, customizing the field names and adding custom behavior for images.
get_media_requests(item, info)

Works the same way as FilesPipeline.get_media_requests() method, but using a different field name for image urls.

Must return a Request for each image URL.

item_completed(results, items, info)

The ImagesPipeline.item_completed() method is called when all image requests for a single item have completed (either finished downloading, or failed for some reason).

Works the same way as FilesPipeline.item_completed() method, but using a different field names for storing image downloading results.

By default, the item_completed() method returns the item.

Custom Images pipeline example

Here is a full example of the Images Pipeline whose methods are examplified above:

import scrapy
from scrapy.pipelines.images import ImagesPipeline
from scrapy.exceptions import DropItem

class MyImagesPipeline(ImagesPipeline):

    def get_media_requests(self, item, info):
        for image_url in item['image_urls']:
            yield scrapy.Request(image_url)

    def item_completed(self, results, item, info):
        image_paths = [x['path'] for ok, x in results if ok]
        if not image_paths:
            raise DropItem("Item contains no images")
        item['image_paths'] = image_paths
        return item